Photo By Viktoryia Rejepova at Shutterstock
With the cooler weather coming and the leaves changing in Schertz, TX, it’s time to start thinking about winterizing your home. That means turning down the thermostat, switching to warm fall clothes, and water heater maintenance.
The water heater is generally the most neglected appliance in the home. Most people don’t think about water heaters until the temperature drops or malfunctions to the extent that the water heater repair is the only option.
However, you can save money and time by making sure your water heater is ready for fall and winter right now by following the best maintenance tips.
Water Heater Troubles To Look Out For
Water heaters may be one of the least expensive appliances you purchase for your home, but they can also be one of the costliest to fix. And it’s better to start taking care of them as early as possible. Schedule a water heater repair if you suspect damage or major breakdown.
Check if your water heater has developed any of the signs below.
- A sudden drop in water pressure
- Abrupt loss of hot water
- A low water tank temperature
- Leaky pipes or base
- A variety of noises emitting from the tank
- A water heater that won’t light
- A water heater that won’t stay lit
Keep an Eye on the Sediment and Debris
When your water heater is old, it can be hard to see muck and debris building around the heating element. Look on the bottom of the tank and around the burner. You want to make sure there isn’t any rust or sediment build-up. If you notice any build-up, you’ll want to try to clean out the area.
Be sure to turn off your water heater and let it cool down before you try to clean it. It would help if you were extra careful when cleaning out sediment because you can cause a severe fire. That’s why it’s safe to take the help of water heater repair experts in Schertz, TX. They have the required skills to inspect your water heater.
Keep It Clean Inside and Out
Water heaters are resilient appliances, but they can get damaged over time, much like everything else. One of the most important things you can do to keep your water heater in good condition is to clean it out. It helps to prevent any sediments from building up on the inside and causing a blockage. Also, keep the outside clean off any rust and debris, potentially damaging it in the long run.
Inspect Your Venting
Inspecting your water heater’s venting and gas supply line is critical to the safety of your family. To prevent carbon monoxide poisoning, you should adequately vent the flue gas out of your home.
New water heaters come with instructions to inspect and potentially replace venting systems. If your water heater is more than ten years old, you should have your system inspected by a skilled repair expert.
Check for Leaks
There are a few signs to look for that could indicate a leak. A common way to check for water leaks is to look for rust or water stains on the floor. If you see these, you should turn off your water heater and have it repaired right away.
It’s important not to put off a repair for too long. The longer you wait to have it fixed, the higher the chances are that you could develop leaks in your water lines, pipes, or even your ceilings and walls. Whether there is water leaking from your unit or not, it’s a good idea to inspect it every year.
Consider a Filter Change
When a water heater is older, sediment can accumulate in it over time and eventually clog it. Consider a filter change by a water heater repair expert in Schertz, TX. It will ensure that sediment doesn’t plug up your water heater.
If you have a tankless water heater, it’s crucial to have a professional check the water flow every so often. Otherwise, the sediment will likely build up in the water heater and cause a clog.
Test Temperature and Pressure
It is essential to test the temperature and pressure of your water heater regularly. First, check the temperature of the water. It should be between 120-140 degrees Fahrenheit.
Next, check the pressure of the water by opening a faucet and letting a steady stream of water flow out. The pressure should be between 30-50 PSI. If you find your water is not at the right temperature or pressure, it is time to call a professional for water heater repair and maintenance.
Follow Manufacturer Recommendations
You should follow the manufacturer’s recommendations when it comes to water heater repair. Manufacturers use a variety of materials and designs for water heaters and ensure you are using the correct techniques and chemicals to prolong the life of your water heater.
For instance, if you’re using an electric water heater, you should not use bleach in the tank since this is damaging to the heating elements. If you use a gas-based water heater, you should not use vinegar since this will corrode the tank.
Schedule a Water Heater Maintenance
Water heaters aren’t built to last forever, but there are things you can do to extend the life of your water heater.
Make sure it’s serviced by an experienced water heater repair professional. It may extend the lifespan of your water heater. They offer a maintenance plan that ensures you get a professional and thorough inspection. That way, you can know how well your water heater is doing.
Get Water Heater Repair Services from the Local Experts
Water heaters require routine check-ups to ensure they are running at their most efficiently. Don’t let your water heater let you down. Call the experts at bluefrog Plumbing + Drain of San Antonio and get professional maintenance and repair services when you need them most.
Our team provides full inspection and repair services for all brands of water heaters. Our plumbers are fully licensed and insured and have years of experience providing water heater repair in the Schertz, TX area.