6 Signs It’s Time To Call A Plumber Specializing In Water Heater Repair | Schertz, TX
Hot water is essential to your daily life. Without it, you’ll have to take cold showers, and cooking and cleaning can be challenging. Also, your washing machine and dishwasher won’t function at peak performance without hot water.
The water that comes into your home is cold, and it fills the water heater where it’s heated and stored and is always there when you need it. If the water heater isn’t working correctly, it can affect the water temperature or your ability to use it.
If your water heater experiences any of the following problems, it’s best to hire a plumber specializing in water heater repair in Schertz, TX.
#1 The Water Isn’t Hot
Cold water coming from the hot water taps indicated a problem, and you may need to call a professional in water heater repair. Before making the call, it’s best to check a few things first to avoid an unnecessary service call.
- Electric units: Check the breaker box to ensure a circuit hasn’t tripped and there’s power going to the unit.
- Oil-fueled or propane units: Check the pilot to ensure it’s lit and ensure there’s fuel in the tank.
- Gas units: Ensure the pilot is lit and check with a neighbor or the gas company to rule out an outage.
If everything checks out on your end, it’s time to call a plumber. If the heating element fails, the unit cannot heat the stored water. The problem could also be due to the unit’s age. If your water heater is over ten years old, it may have reached the end of its lifespan and has to be replaced.
#2 Lukewarm Water
Check the unit’s thermostat if the water doesn’t get hotter than lukewarm. Keeping the thermostat set to 120 to 140 degrees is recommended because it’s hot enough to perform daily tasks and not too hot that the water will cause a burn. Increasing the temperature should solve the problem if the thermostat is set below 120 degrees. If the thermostat is set correctly, it’s time to call a plumber specializing in water heater repair in Schertz, TX.
A few issues can affect the water’s temperature, such as a faulty thermostat or the unit is nearing the end of its lifespan and can no longer function efficiently. If your water heater has two heating elements, one may not work, and the functional heating element isn’t powerful enough to heat the water supply.
A plumber can inspect the unit to determine why the water isn’t hot enough and resolve the problem.
#3 Poor Hot Water Pressure
Adequate water pressure is essential for daily household tasks, and poor water pressure can make simple daily tasks like washing your hair or doing the dishes take longer. Also, your hot water-based appliances won’t work correctly.
A sediment buildup in the waterline causes poor water pressure. When sediment builds up in the water tank, the hot water can cause it to break apart and clog the waterline, and you’ll need the help of a professional in water heater repair in Schertz, TX.
If the plumber can’t flush the sediment, you’ll need to replace the water heater. If you don’t, it won’t be long before the waterlines clog again, and another service call will be necessary.
#4 Brown or Rust-Colored Hot Water
If the hot water doesn’t come out clear and is brown or rust-colored, you should immediately call a plumber specializing in water heater repair. When sediment accumulates in the tank, the hot water will break it up and contaminate the water. If the plumber can’t flush the sediment, you’ll need to replace the water heater to ensure the water is safe to use.
If the unit is over ten years, the inside of the tank could be breaking down, causing tiny metal shards and deposits to contaminate the water, and the unit has to be replaced. It’s best to avoid using the hot water until the problem is resolved. If you must use it, boil it first to ensure the water is safe.
#5 Banging Sound
Your water heater should be whisper quiet, and if you hear a banging sound, call a plumber specializing in water heater repair. When large amounts of sediment build up in the tank, it will bang against the sides. If the problem isn’t resolved quickly, the sediment could crack the tank, resulting in a significant flood in your home.
The plumber can try to flush the sediment; if they can’t, you’ll need to replace the unit.
#6 Water Pooling Around the Unit
Moisture on the floor or walls around the unit often indicates a loose or cracked hose. Fortunately, this is a relatively easy fix, but ignoring the problem can result in water damage and mold growth around the unit, and you should hire a professional in water heater repair immediately.
Water pooling indicates a leak in the tank that could cause 50+ gallons of water to flood your home. Cracks cannot be fixed, and you’ll need a plumber to replace the water heater.
Call bluefrog Plumbing + Drain + HVAC of San Antonio
If your water heater isn’t working correctly and you need to hire a plumber specializing in water heater repair, look no further than bluefrog Plumbing + Drain + HVAC of San Antonio. We’re a full-service plumbing and HVAC service, and our plumbers are experts in water heater installation, maintenance, and repair.
Our plumbers have gone through years of training and apprenticeship to learn their craft and have the knowledge and experience to handle any plumbing job, regardless of how complex it might be.
If you have a plumbing problem that can’t wait, don’t panic. We provide emergency service 24 hours a day, 365 days a year, and will get a plumber to your house as quickly as possible to resolve the problem.
To schedule an appointment for water heater repair or any other service we provide, give bluefrog Plumbing + Drain + HVAC of San Antonio a call or book online at https://bluefrogsanantonio.com/schedule-service/.