Plumbing Service: Can High Water Pressure Damage My Home’s Plumbing? | San Antonio, TX
Photo By Madhourse at istock
No one wants to shower or wash the dishes with low water pressure as it can take forever. On the other hand, you don’t want to waste hundreds of gallons of water due to high water pressure. High water pressure can also severely strain the pipes and may even damage some of your appliances, such as the washing machine, water heater, and dishwasher. You can waste up to 26 gallons of water every 10 minutes that you use the faucet or the shower on high water pressure.
As much as possible, get a plumbing service in San Antonio, TX, so a professional plumber can check your water pressure and help you regulate it. This article will talk about high water pressure, signs of high water pressure, and what you can do to alleviate the problem.
How High Is Your Water Pressure and What Are the Signs?
For a residential home, a water pressure above 60 PSI is already considered too high. You should aim for at least 45 to 55 PSI if you don’t want to damage your home’s plumbing. If you don’t know how to check your water pressure, you can always get a plumber.
As mentioned, high water pressure can erode pipes and can lead to breakage. If you don’t schedule a leak detection plumbing service, leaky pipes can cost you a fortune in repairs. You want to avoid this by regulating the water pressure in your home.
High water pressure can also damage your water heater. Remember that water expands when heated. Thankfully, your water heater has a thermal expansion tank to take on the extra volume. However, it may not be able to accommodate when the water pressure is consistently high. This can result in catastrophic water damage. This is why you need to get help from a plumber immediately.
Signs of High Water Pressure
You need to watch out for the high water pressure signs such as banging pipes. When the pressure is too excessive, it can cause the water to trash through your plumbing pipes, causing banging sounds. This can be really annoying, especially when it occurs at night. You can get a plumbing service so a professional can do a full inspection and rule out any problems.
Other signs you need to watch out for are the running toilets. Although rare, the high water pressure may cause the toilet to run continuously. Get a plumbing service so they can check whether the high pressure causes the running toilet in the water or it really needs to be fixed.
Another sign you need to watch out for is the leaky toilets. They may leak at certain times, especially when the water pressure is too high.
If your water bills are too high, the water pressure could be one of the culprits. The best thing you can do is get a plumber to check the water pressure or do a leak detection service.
Do you notice these signs in your home’s plumbing? Get help right away before it turns into a plumbing emergency. bluefrog Plumbing offers a wide range of plumbing services, including water pressure inspection. Contact us today for an appointment.
How to Fix High Water Pressure
It’s quite easy to fix high water pressure as you only need the pressure-reducing valve. You should start seeing improvement when the water pressure in your home is finally resolved—your get reduced water consumption which means more savings and helping the environment. Get a plumbing service if you need help.
The pressure-reducing valve should last between 7 to 12 years. If you need help with the installation or replacement, don’t hesitate to contact bluefrog Plumbing. If you still have it and you’re still having issues with the water pressure, please call us right away to fully inspect your system.
You can also get a Pressure Gauge at any hardware store, and you can easily attach it to the faucet. First, you need to turn off all the appliances in your home and then look for a faucet closest to your water main. Attach the pressure gauge to the faucet before turning the water back on. Just give it a few seconds, and then check the water pressure again. Aim for at least 50 psi. Note: if you don’t know how to do this, get a plumbing service so a professional can help.
Don’t Ignore Problems
Thankfully, it takes time for high water pressure to do some serious damage to your plumbing. So make sure that you proactively do something about it. Never postpone any repairs or inspections to avoid further damage. You can extend the lifespan of your pipes, appliances and plumbing fixtures the sooner you take action. Get a plumbing service in San Antonio, TX, so a professional can inspect your entire plumbing system and rule out any issues. Don’t worry; bluefrog Plumbing ensures that you are completely delighted with our service. After the appointment, you should see some significant improvement in your water pressure. Get in touch with us today for a full inspection.
Contact bluefrog Plumbing + Drain of San Antonio
Do you need a plumbing service in San Antonio, TX? bluefrog Plumbing is always available to assist. All of our plumbers are certified, licensed, and highly skilled to tackle any plumbing job. Whether you need us to help with your water pressure or leak detection, we are always happy to help. You can call us anytime you want, especially during emergencies. One of our top priorities is to ensure that your plumbing is efficient and helping you save water. Contact us if you need help with any plumbing repairs, maintenance, or installations. Rest assured, you will be delighted with the service we provide. Get in touch with us today for an appointment.
Priority Service