How High Water Pressure Causes You to Need Plumbing Repair | San Antonio, TX
Photo By poylock19 at Shutterstock
Do you have high water pressure in your home? If you do it might sound great and you might think that you’ve got something good. But the truth is that high water pressure can be a bad thing if you’re not careful. Sure, a moderate amount of water pressure is great and it’s going to feel good when you take a shower, do the dishes or even just wash your hands, but if you turn the pressure up too high you’re going to start noticing problems that need serious plumbing repair.
The Problems with High Water Pressure:
First, you’re going to find that it’s expensive to have higher water pressure (and not just because of plumbing repair). That’s because you’re using a whole lot more water in a shorter amount of time. In fact, if you use high water pressure you can actually end up using up to 26 gallons of extra water for every 10 minutes that you have the water on. That’s going to cost you a great deal of money and it’s not going to be good for the environment either. After all, you’re expending a great deal of extra water that isn’t needed.
Now, if you want to turn the water pressure up a little bit this is going to be a negative for your water bill and the environment, but it’s not going to be too terrible. When it comes to turning things up too high in San Antonio, TX, however, you’re going to find yourself with a whole lot more problems. It’s not just about expending more water or raising your water bill. It’s also going to be cause damage to the pipes that run through your entire home. And that’s going to cost you even more in plumbing repair.
When you’re using too much water and increasing the pressure too high you actually could end up with a greater risk of leaks and sounds through your pipes. These can range from minor annoyance all the way up to serious problem that absolutely needs to be repaired. And that’s not the only thing that you’re going to find. You’ll also have a much higher risk of your pipes actually breaking, whether fully breaking and bursting or cracking and slowly starting to break down. And both of these things are going to be serious plumbing repairs.
Is Your Water Pressure Too High?
Do you know if your water pressure is too high or not? Well, you should take a look at this. If you water pressure is around 45 to 55 PSI then you’re probably going to be doing great. Your water pressure shouldn’t be any higher than this, however. If you end up with water that’s around 60 PSI then you’re probably way too high. You want to make sure that you keep your water below this because you’re going to end up with damage to your pipes and a whole lot more.
The Signs You Need to Watch For:
So, how are you going to be able to tell that your water pressure is too high? Well, you might notice that you need one of the different types of plumbing repair that we mentioned previously. You might also notice a few different problems that require you to call a plumber. We’re going to talk about some of the most common problems that you’re going to see and just why these might mean that you have your water pressure turned up too high. And you’ll be able to reduce the pressure to get some improvement.
First, you might notice banging in your pipes. This happens because you have too much water moving through the pipes. As it pushes through and fights its way around the pipes you’re definitely going to hear that knocking, banging and other sounds. That’s because the water is moving too quickly. You want to make sure that you’re listening for these sounds when you turn the water on. That way you’ll know when the water is getting too high and you’ll want to turn it back down. This means that there’s likely not too much damage that has already happened if it’s happening alone.
Next, you might notice that there is a leak in your faucets. This tends to happen when the water pressure gets too high because the pressure is being forced through the sink and pipes and it gets too much for the pipes to handle. As a result, you could end up with a mild leak or a more serious leak. Either way you’re going to need plumbing repair. You’re also going to need to turn down the water pressure right away so you don’t end up with even more serious problems as you continue on.
When you’re ready to change the water pressure in your house you want to make sure that you are starting with low pressure. Then, make sure that you slowly bring it back up. From there you’re going to have a much more pleasant shower and you’re also going to save more on water. You won’t have to worry about damage to your water pipes if you make sure that you keep your water within the safe zone. You’re definitely going to be happier with the balance that you get as well. Just make sure that you’re watching your pipes and all of your plumbing for any type of problems.
If you have any problems moving forward you’re going to need call bluefrog Plumbing + Drain of San Antonio, TX. Make sure that you’re keeping an eye on everything in your home and that you know when to get in touch with a plumbing repair professional and when things are actually going okay. If there’s a problem with your plumbing you need to get it taken care of fast. That’s because you’re going to end up with bigger problems if you don’t get that plumbing repair done right away. Don’t let anything fall by the wayside.
Priority Service