Most homeowners don’t think much about their hot water heater. In fact, the only time you probably even notice your hot water heater is when you are rearranging the storage in your basement or when something goes wrong. However, like any appliance in your home, problems can arise with your hot water heater if it is not properly maintained. This is why almost every plumber will recommend regular hot water heater repair and service.
There are many factors that signal it is time for water heater repair, and many of those signs occur before you wake up without hot water. Instead of waiting for an emergency to occur, here are some common signs that your hot water heater is in need of repair. Remember, proactive action will always save you money versus waiting until you are backed into a corner.
Water Heat Seems to Change for No Apparent Reason
While waking up with no hot water is a clear sign that you needwater heater repairmost likely you will notice that the water temperature fluctuates before you get to this point. If you seem to have hot water on some days and other days it turns lukewarm quickly this can be a sign that you need any repairs for your water heater.
Of course, if you are consuming a large amount of hot water in your house then this is reasonable, but if you are the only one using the hot water you have a problem. Many times when water temperatures start fluctuating for no apparent reason it is a sign that the heating elements in your hot water heater are covered with mineral deposits. It could also mean that something is wrong with the heating element. A simple hot water heater repair visit should be all it takes to diagnose and fix the problem so you can go back to enjoying hot water on a regular basis.
Your Hot Water Heater Is Leaking
Admittedly, this seems like a very easy sign to notice, but sometimes there are small leaks that lead to large noticeable leaks. If you don’t regularly inspect your water heater you will never know that you needwater heater repairuntil the situation is already out of hand. Ideally, you don’t wait until your basement is flooded to find out that you need to repair or replace or your water heater. After all, a water heater is already a big enough expense without adding flood damage to the mix.
You can easily avoid finding yourself in this situation by regularly checking the area around your water heater for any moisture or signs of mold. A quick scan is all it takes to determine whether or not your water heater is performing at its best. A lot of people do add this to their monthly maintenance tasks such as mowing their grass, changing the AC filters, or checking home smoke detectors. If you incorporate it into a routine checking your water heater will become an easy task.
Your Home Water Pressure Seems Low
Every home has its own water pressure. While everyone enjoys a lot of water pressure, some older homes in San Antonio, TX have lower water pressure as a baseline. There are things that a plumber can do to help remedy this situation, but in the meantime, you know what your water pressure normally is as a baseline. If you notice that your water pressure suddenly drops then it may be time to look at water heater repair. At the very least, you need to call a plumber to inspect why it dropped because your water pressure should remain somewhat consistent.
Once again it is highly likely that mineral deposits are to blame. Mineral deposits can easily build up in the pipes or the bottom of the water heater reducing how quickly the water flows out of your water heater. The end result is you get a trickle of water instead of a thick heavy stream. This is just the most common reason you will need repairs for your water heater however, there are several other reasons which is why you need to have a professional come to your home to diagnose water heater problems. Poor design, the wrong size water heater, and kinked distribution lines can also cause problems with the water pressure in your home. Only a trained technician can accurately perform water heater repair and figure out the actual problem.
Your Water Heater Is Making Sounds
Outside of a possible gentle hum, your hot water heater should not make any sounds. If you start to hear any banging, popping, or cracking sounds this is a major sign that it is time forwater heater repair. Sometimes you don’t hear the sounds all of the time, but when the water heater applies they become obvious. Usually, loud sounds are caused by mineral deposits that cause overheating since the water and airflow is compromised.
If you hear sounds you need to call a repair service right away. If you can get to the bottom of the problem before the tank starts to leak it may be possible to repair and avoid replacement. Eventually, a tank that is overheating will leak from the pressure and possibly burst. A thorough flush and cleaning can save you from this reality.
Ready to call and schedule awater heater repairservice? If your water heater has never been looked at, it’s a good idea to let ourSan Antonio, TXexperts take a look and evaluate its condition. At the very least if it is over five years old and has never been serviced it probably needs to be cleaned to help remove the troublesome mineral deposits that are responsible for so many issues.bluefrog Plumbing + Drain of San Antoniohas been helping customers with their water heaters for years, and we would be glad to come out and inspect your water heater to ensure it is running effectively and safely.