Water Heater Repair: Is It A Good Idea To Adjust Your Water Heater Temperature? | San Antonio, TX
Photo By Vitaliy Halenov at istock
Are you having problems with your water heater? Perhaps you’re considering adjusting the temperature on your water heater. Many people decide to change their water heater temperature, to get hotter or colder water or to reduce their utility bills. The critical thing to remember is that adjusting the temperature could cause problems. If the waters are too hot it could cause scalding, which can be dangerous, especially if you have small children.
This article will look at adjusting your water heater’s temperature and help you decide whether or not it’s a good idea. If you live in San Antonio, TX or the surrounding area and are searching for water heater repair, don’t hesitate to contact bluefrog plumbing and drain. The company is available for all types of plumbing services, including drain cleaning and repair.
Does Lowering Your Water Heater Temperature Reduce Utility Bills?
If you’re looking for ways to make your home more environmentally friendly or want to save money on your utility bills, you may be considering adjusting your water heaters temperature.
It’s well known that water heaters consume large amounts of power and are expensive to operate. It costs homeowners an average of $781 to use their water heater every year. If you want to find out exactly how much your water heater is costing you, you can check the label on your appliance to find the annual operating cost.
Homeowners often ask water heater repair services whether it’s safe to adjust their water heater temperature. In general, reducing the water temperature is safe and is something that you can do yourself. Before deciding to change your water heater temperature, you may like to consider a few things.
How low should you set your water heater temperature?
Adjusting your water heaters temperature will result in colder water as well as a reduced energy bill. It’s estimated that reducing the water temperature by 20 degrees will save you up to ten percent on your utility bill.
If you decide to adjust your water heater, you’ll also need to consider the consequences of doing so. If you set your water heater temperature to a low setting, it can cause disease.
Water heater repair services recommend that you don’t set your water heater’s temperature to below 120 degrees. While that sounds hot, it’s necessary for killing off germs and bacteria. If your water heater is below 120 degrees, you could be putting your health and your family’s health at risk.
The risks of setting your water heater temperature too low
If your water heater has been turned down to below 120 degrees, this can cause bacteria to grow and cause stagnant water to form inside your water heater. This can be dangerous to health as you’ll be washing and preparing food with water that’s full of bacteria.
Another problem with lowering the temperature of your water heater is that your showers will be colder. This will force you to have a shorter shower. If you have a large family, the hot water is likely to run out quickly, which means that there may not be enough for everyone to have a hot shower or bath.
Can I increase the temperature of my water heater?
If you feel that the water is coming out of your faucets at a temperature that’s too cold, you may like to increase your water heater’s temperature. This will give you warmer water but is also likely to increase your energy bills.
You’ll need to be careful that you don’t increase the temperature too much, as this could result in scalding. It’s incredibly important to avoid scalding children. Repair professionals recommended that you increase your water heater’s temperature to no more than 140 degrees.
For safety reasons and to avoid scalding, your water heater’s temperature should be set to 120 degrees, to begin with. If you’d like to make your water hotter, increase the temperature a bit at a time in small increments. This will allow you to get your water temperature just right, and you’ll be able to find the perfect bath temperature.
Common Water Heater issues
Homeowners commonly call out water heater repair services if their water is too cold. This may be because the pilot light has gone out. Or could be due to problems with the thermocouple, the gas control valve, or the heating element on an electric unit.
If you don’t have enough hot water, there could be problems with the temperature setting on the water heater. If you have an electric heater, this issue could be caused by the heating elements. There may also be sediment in the tank or a dip tube that’s damaged or disconnected.
As you can see, various issues can cause your water to become too hot or too cold. Rather than immediately deciding to adjust your water heater temperature, you may like to call out a plumber who can carry out any necessary water heater repair or maintenance.
bluefrog Plumbing + Drain
If you live in San Antonio, TX, or the surrounding area and are having problems with your water heater, don’t hesitate to contact bluefrog for water heater repair.
The company can advise about setting and adjusting your water heater’s temperature and can carry out any necessary repairs. They can also fix a leaking water heater.
Choose bluefrog water heater repair Services—the San Antonio water heater repair specialist. You won’t have to worry about the performance of your water heater again.
bluefrog is available to repair all aspects of your property’s plumbing system and can carry out water heater repair. They are a locally owned and operated business with a track record of providing a good quality service that’s excellent value for money.
Contact bluefrog Plumbing + Drain of San Antonio today on 210-876-1629.
Priority Service